The Raychem FTC-HST connection kit is used with IceStop and XL-Trace Systems to make splice and tee connections, and with RaySol System heating cables to make splice connections for heat loss replacement (on slab bottoms only). Materials for 2 splice or tee connections are included in each kit.
The Raychem FTC-P Power Connection and End Seal Kit is for use with XL-Trace, Raysol, and IceStop heating cables. Materials for one power connection and one end seal are included in a kit. The installation instructions should be used in conjunction with either the XL-Trace, Raysol or IceStop System Installation and Operation Manual.
The Raychem FTC-PSK connection kit is used with XL-Trace Systems to make a pipe mounted power connection kit. The kit is designed to be used with the ECW-GF electronic thermostat or any approved junction box with 1-inch conduit entry.
The Raychem FTC-XC Power Connection and End Seal Kit is for use with XL-Trace and Raysol heating cables that are installed in conduit, or are transitioned for the junction box to the pipe through conduit. Materials for one power connection and one end seal are included in this kit.
The Raychem RayClic-E is a replacement end seal kit for use with XL-Trace, HWAT, IceStop and Raysol heating cable systems. The RayClic-E is a reliable rugged, simple to install gel filled end seal.
The Raychem RayClic-LE lighted end seal kits are installed wherever an end-of-line signal light is required to give visual indication that a heating cable circuit is energized. Each kit contains one RayClic-LE lighted end seal and one RayClic-SB-04 pipe mounting bracket.
The Raychem RayClic-PC can supply power to one heating cable. Each kit contains one RayClic-PC power connection, one RayClic-E end seal, and one SB-04 pipe mounting bracket. The kit includes five foot power lead wires and conduit fitting; the junction box and flexible conduit required to make a complete connection are not included.
A RayClic-PS can be used as a power connection kit for supplying power to two heating cables. Each kit contains one RayClic-PS powered splice connection, two RayClic-E end seals, and one SB-04 pipe mounting bracket. The kit includes five foot power lead wires and conduit fitting; the junction box and flexible conduit required to make a complete connection are not included.
A Raychem RayClic-PT can be used as a power connection kit for supplying power to three heating cables. Each kit contains one RayClic-PT powered tee connection, three RayClic-E end seals, and one SB-04 pipe mounting bracket. The kit includes five foot power lead wires and conduit fitting; the junction box and flexible conduit required to make a complete connection are not included.
Raychem RayClic-S splice kits are installed as needed to connect two heating cables together at one point. Each kit contains one RayClic-S splice.
Raychem RayClic-T kits are installed as needed to connect three heating cables together at one point. Each kit contains one RayClic-T tee connection and one RayClic-E end seal.
Raychem RayClic-X cross kits are installed as needed to connect four heating cables together at one point. Each kit contains one RayClic-X cross and two RayClic-E end seals.
©2020 GFI Solutions, Inc. - Website by The Agency for Design